Principle: The Wintex 1000 takes homogeneous soil samples in the depth of 30 cm (approx. 12"). The depth can vary infinitely from 10 - 30 cm (approx. 4" - 12"). The soil sample is taken with a probe and not as other soil sampling machines with an auger. This means that Wintex 1000 takes a completely homogenous sample, being a cone of soil that is taken at the adjusted depth. If the sample is taken with an auger, you will always take more material from the top layers than the lower layers of soil.

Wintex 1000 is distinguished by the fact that it can take soil samples in any kind of soil - also newly ploughed soil. The specially developed probe has a size, which with 10-14 sticks takes about 300 grams of soil, which is the quantity of soil to be used at the laboratories for analysis. The soil sample is automatically filled into the box that is sent to the laboratories, which means a quick and effective way of getting through work. Wintex 1000 has a capacity of 38 soil samples per hour with 10 sticks in each, which means 380 sticks per hour, as all functions are carried out from the driver's seat.

Transport Machine for Wintex 1000.

Wintex 1000 can be delivered from the factory mounted on an ATV, Honda TRX 450 S/ES Foreman, but can also be delivered separately for installation on other vehicles. By installation of Wintex 1000 on above ATV you will have a quick and effective transport machine for all kinds of ground, and at the same time the hydraulic system is integrated into the ATV, which means a low noise machine without need for an extra engine for the soil sampling machine.

The power for Wintex 1000 is a 12-Voltage DC. The battery on the ATV needs a capacity of 14 Amph and a load capacity of 250 Watt. The control circuit for the Wintex 1000 must be connected to the electrical brake system on the ATV. Hydraulic supply: 7.5 litre/min at 75 - 100 bar.